Drive Line Service of Fresno 800-824-0706

Print  

 

 

1. K64 Housings

K64 Hubs

K64/22 hubs utilize 2 cams

K64/24 hubs utilize 4 cams

4. Bushing

5. Cam

6. Springs

K64 torque settings can be adjusted by :

1) choosing 2 or 4 cams.......

2) choosing appropriate spring pack

3) spring packs can be adjusted by tightening or loosening the nut - there are only 4 different spring combinations

Used In	Springs x Thickness	"L"	Torque / nm	Part No
K64/22	5X2.0mm		1200	135695
K64/22	6x2.0mm	53mm	1300	129936
K64/22	6x2.0mm	52.3mm	1400	129938
K64/22	6x2.0mm	51.6mm	1500	129938
K64/22	6x2.0mm	50.5mm	1650	129939
K64/22	6x2.0mm	49.1mm	1800	129940*
K64/22	6x2.0mm	48.7mm	2000	129941*
K64/22	6x2.0mm	48.3mm	2200	129942
K64/22	6x2.0mm	48mm	2350	134858
K64/22	6x2.0mm	47.5mm	2500	134859
K64/24	5x2.5mm		2500	128477
K64/24	5x2.5mm	52mm	2700	129841
K64/24	5x2.5mm	51mm	2900	129842
K64/24	5x2.5mm	50mm	3200	129843
K64/24	5x2.5mm	49mm	3500	129844
K64/24	5x2.5mm	48mm	3800	136720
K64/24	6x2.5mm	53mm	4000	134705
K64/24	6x2.5mm	52mm	4200	136718
K64/24	6x2.5mm	51mm	4500	134706
K64/24	6x2.5mm	50mm	5000	136707

 

 

7. Clamping Cone